حلقة منع تسرب زيت الترس التفاضلي
أكواد OE / المواد
10173783-00e6-1701550ماذا يحدث بعد ذلك:
- راجع اختياراتك في صفحة السلة.
- ادفع مباشرة عبر Stripe (عندما تكون كل العناصر بأسعار التجزئة).
- أو أرسل القائمة كطلب عرض سعر للجملة.
المواصفات الفنية
- موديل السيارة
- BYD Atto 3
- تكوين التوجيه
- عام (مقود يسار ومقود يمين)
الشحن والإرجاع
شحن عالمي من الصين جواً أو بحراً. التسليم القياسي 5–30 يوم عمل، السريع 2–10 أيام عمل. تحسب تكلفة الشحن عند الدفع.
نافذة إرجاع 7 أيام للقطع غير المستخدمة في عبوتها الأصلية. تواصل معنا قبل إرجاع أي قطعة.
السيارات المتوافقة — حلقة منع تسرب زيت الترس التفاضلي
حلقة منع تسرب زيت الترس التفاضلي دليل الورشة — BYD Atto 3
Left Differential Oil Seal - Removal and Installation
Removal
- Remove the front motor lower mudguard assembly. See Front Motor Lower Mudguard Assembly - Removal and Installation
- Discharge the differential mechanism gear oil. See Replacement of Differential Gear Oil
- Remove the left front drive half shaft assembly. See Left Front Drive Half Shaft Assembly - Removal and Installation
- Carefully remove the left differential oil seal.
Caution When removing the oil seal, special care should be taken not to scratch the reducer housing. The differential oil seal is not reusable and needs to be installed with a new differential oil seal.
Installation
- Install the differential oil seal with the special tool (Tool Name: half shaft oil seal installation tool; Material No. 13461863-00).
See the Manual of Special Tools
Caution Before installing the differential oil seal, clean the differential oil seal base and the new differential oil seal. Apply a thin layer of differential lubricating oil to the outer wall of the differential oil seal before installation. When installing the differential oil seal, be careful to prevent installing it at an angle. After the differential oil seal is installed, it is necessary to check and ensure that it is installed in place.
Right Differential Oil Seal - Removal and Installation
Removal
- Remove the front motor lower mudguard assembly. See Front Motor Lower Mudguard Assembly - Removal and Installation
- Discharge the differential mechanism gear oil. See Replacement of Differential Gear Oil
- Remove the right front drive half shaft assembly. See Right Front Drive Half Shaft Assembly - Removal and Installation
- Carefully remove the right differential oil seal.
Caution When removing the oil seal, special care should be taken not to scratch the reducer housing. The differential oil seal is not reusable and needs to be installed with a new differential oil seal.
Install
- Install the differential oil seal with the special tool (Tool Name: half shaft oil seal installation tool; Material No. 13461863-00).
See the Manual of Special Tools
Caution Before installing the differential oil seal, clean the differential oil seal base and the new differential oil seal. Apply a thin layer of differential lubricating oil to the outer wall of the differential oil seal before installation. When installing the differential oil seal, be careful to prevent installing it at an angle. After the differential oil seal is installed, it is necessary to check and ensure that it is installed in place.
حلقة منع تسرب زيت الترس التفاضلي مخطط التركيب — BYD Atto 3
قطع أخرى في هذه المجموعة
