شفّاط التوجيه الأمامي الأيمن

Removal

1. Remove the right front hub unit assembly. See Front Hub Unit Assembly - Removal and Installation
2. Remove the right front ball stud press assembly. See Ball Stud Press Assembly - Removal and Installation
3. Remove the right front wheel speed sensor. See Right Front Wheel Speed Sensor - Removal and Installation
4. Detach the mechanical steering gear with tie rod assembly from the right front steering knuckle.
   
5. Remove 1 fixing pin.
6. Remove 1 fixing nut.
7. Remove the ball joint with the ball joint remover.
8. Remove the right front steering knuckle.
   
9. Detach the wiring harness clip and put aside the wiring harness.
10. Remove 2 fixing nuts/bolts, and take out the right front steering knuckle.

Installation

1. The installation steps are opposite to the removal steps.
2. Wheel alignment shall be carried out after the installation. See Four-Wheel Alignment

Removal

1. Remove the left front hub unit assembly. See Front Hub Unit Assembly - Removal and Installation
2. Remove the left front ball stud press assembly. See Ball Stud Press Assembly - Removal and Installation
3. Remove the left front wheel speed sensor. See Left Front Wheel Speed Sensor - Removal and Installation
4. Detach the mechanical steering gear with tie rod assembly from the left front steering knuckle.
   
5. Remove 1 fixing pin.
6. Remove 1 fixing nuts.
7. Remove the ball joint with the ball joint remover.
8. Remove the left front steering knuckle.
   
9. Detach the wiring harness clip, and put aside the wiring harness
10. Remove 2 fixing nuts, take out 2 fixing bolts, and take out the left front steering knuckle.

Installation

1. The installation steps are opposite to the removal steps.
2. Wheel alignment shall be carried out after the installation. See Four-Wheel Alignment