وكالة
BYD Atto 3

شفّاط التوجيه الخلفي الأيسر - حزمة ما بعد البيع

أكواد OE / المواد

14735238-00SC2EM-2404101HW
$83USD
متوفر
التوفّر بحسب الجودة

ماذا يحدث بعد ذلك:

  • راجع اختياراتك في صفحة السلة.
  • ادفع مباشرة عبر Stripe (عندما تكون كل العناصر بأسعار التجزئة).
  • أو أرسل القائمة كطلب عرض سعر للجملة.

المواصفات الفنية

موديل السيارة
BYD Atto 3
تكوين التوجيه
مقود يسار ومقود يمين

الشحن والإرجاع

شحن عالمي من الصين جواً أو بحراً. التسليم القياسي 5–30 يوم عمل، السريع 2–10 أيام عمل. تحسب تكلفة الشحن عند الدفع.

نافذة إرجاع 7 أيام للقطع غير المستخدمة في عبوتها الأصلية. تواصل معنا قبل إرجاع أي قطعة.

السيارات المتوافقةشفّاط التوجيه الخلفي الأيسر - حزمة ما بعد البيع

BYDYuan PLUS/Atto 3
2024

شفّاط التوجيه الخلفي الأيسر - حزمة ما بعد البيع دليل الورشةBYD Atto 3

Left Rear Steering Knuckle - Removal and Installation

Removal

  1. Remove the left rear brake mudguard. See Left Rear Brake Mudguard - Removal and Installation
  2. Remove the rear suspension left towing arm assembly. See Rear Suspension Left Towing Arm Assembly - Removal and Installation
  3. Remove 1 fixing bolt, and put aside the floor wiring harness.
  4. Remove 1 fixing nut/bolt from the left rear steering knuckle and the left rear shock absorber assembly.
  5. Remove 1 fixing nut/bolt from the left rear steering knuckle and the upper left arm assembly of the rear suspension.
  6. Remove 1 fixing nut/bolt between the left rear suspension lower arm assembly and the left rear steering knuckle.
  7. Remove the left rear steering knuckle.
  8. Remove 1 fixing nuts.
  9. Detach the left rear suspension control arm assembly, and take out the left rear knuckle.

Installation

  1. The installation steps are opposite to the removal steps.
  2. Implement four-wheel alignment after installing the rear steering knuckle. See Four-Wheel Alignment

Rear Right Steering Knuckle Assembly - Removal and Installation

Removal

  1. Remove the rear right brake mudguard. Refer to Right Rear Brake Mudguard - Removal and Installation
  2. Remove the rear suspension right trailing arm assembly. Refer to Rear Suspension Right Towing Arm Assembly - Removal and Installation
  3. Remove 1 fixing bolt, and put aside the floor wiring harness.
  4. Remove 1 fixing nut/bolt from the rear right steering knuckle and the rear right shock absorber assembly.
  5. Remove 1 fixing nut/bolt from the rear right steering knuckle and the upper right arm assembly of the rear suspension.
  6. Remove 1 fixing nut/bolt between the rear right suspension lower arm assembly and the rear right steering knuckle.
  7. Remove the rear right steering knuckle.
  8. Remove 1 fixing nut.
  9. Detach the rear right suspension control arm assembly, and take out the rear right knuckle.

Installation

  1. Install it in the reverse order of removal.
  2. Implement four-wheel alignment after installing the rear steering knuckle. Refer to Four-Wheel Alignment