Сборка бачка тормозной жидкости
OE / Каталожные коды
12686089-00STHA-3540020Технические характеристики
- Модель
- BYD Atto 3
- Конфигурация рулевого
- Универсальный (LHD и RHD)
- Категория
- Тормоза
Доставка и возврат
Доставка по всему миру из Китая авиа или морем. Стандартная доставка 5–30 рабочих дней, экспресс 2–10 рабочих дней. Стоимость рассчитывается на оформлении заказа.
7-дневный возврат для неиспользованных товаров в оригинальной упаковке. Свяжитесь с нами до отправки возврата.
Совместимые автомобили — Сборка бачка тормозной жидкости
Сборка бачка тормозной жидкости Руководство по ремонту — BYD Atto 3
Brake Fluid Reservoir Assembly - Removal and Installation
Removal
- Draw brake fluid pot oil. Replacement of Brake Fluid
- Loosen 1 fixing clamp, and detach the brake fluid reservoir connecting hose assembly from the brake fluid reservoir assembly.
- Remove 2 fixing bolts, and take out the brake fluid reservoir assembly.
Installation
- The installation steps are opposite to the removal steps.
Caution After installation, add brake fluid to the level between the MAX and MIN scales of the brake fluid reservoir assembly. After installation, check that there is no oil leakage at the connection of the pipeline. If there is any, it needs to be overhauled.
Brake Fluid Reservoir Connecting Hose Assembly - Removal and Installation
Installation
- Draw brake fluid pot oil. See Replacement of Brake Fluid
- Remove the brake fluid reservoir assembly. See Brake Fluid Reservoir Assembly - Removal and Installation
- Remove 1 fixing clamp, and take out the brake fluid reservoir connecting hose assembly.
Installation
- The installation steps are opposite to the removal steps.
Caution After installation, add brake fluid to the level between the MAX and MIN scales of the brake fluid reservoir assembly. After installation, check that there is no oil leakage at the connection of the pipeline. If there is any, it needs to be overhauled.
Brake Fluid Reservoir Mounting Bracket Assembly - Removal and Installation
Removal
- Remove 2 fixing bolts, and detach the brake fluid reservoir assembly.
- Remove the brake fluid reservoir mounting bracket assembly.
- Remove 1 fixing clip, and detach the front compartment wiring harness.
- Remove 4 fixing nuts, and take out the brake fluid reservoir mounting bracket assembly.
Installation
- The installation steps are opposite to the removal steps.
Сборка бачка тормозной жидкости Схема установки — BYD Atto 3
Другие детали в этом узле
