Левый передний тормозной суппорт в сборе
OE / Каталожные коды
13844741-00SC2EM-3501120Что дальше:
- Просмотрите выбранное на странице корзины.
- Оплата напрямую через Stripe (когда все позиции с розничной ценой).
- Или отправьте список как запрос для оптовой цены.
Технические характеристики
- Модель
- BYD Atto 3
- Конфигурация рулевого
- LHD и RHD
- Категория
- Тормоза
Доставка и возврат
Доставка по всему миру из Китая авиа или морем. Стандартная доставка 5–30 рабочих дней, экспресс 2–10 рабочих дней. Стоимость рассчитывается на оформлении заказа.
7-дневный возврат для неиспользованных товаров в оригинальной упаковке. Свяжитесь с нами до отправки возврата.
Совместимые автомобили — Левый передний тормозной суппорт в сборе
Левый передний тормозной суппорт в сборе Руководство по ремонту — BYD Atto 3
Left Front Brake Caliper Body Sub-Assembly - Removal and Installation
Removal
- Set the intelligent power brake system assembly to "installation mode". See Installation Mode of Intelligent Power Braking System
- Remove the left front wheel assembly. See Wheel Assembly - Removal and Installation
- Discharge brake fluid. See Replacement of Brake Fluid
- Remove one fixing bolt and detach the left front brake hose assembly.
- Remove 2 fixing bolts and take out the left front brake caliper body sub-assembly.
Caution The brake fluid has a strong corrosive effect on the paint. If it is accidentally splashed on the paint of the vehicle body, it must be cleaned with a rag as soon as possible. Avoid oil contact with skin. If it is accidentally splashed into the eyes, immediately rinse with plenty of water and seek medical attention as soon as possible. Do not discharge the oil at will, and recycle it according to local regulations.
Installation
- The installation steps are opposite to the removal steps.
- Fill the brake fluid, and drain the brake system of the left front wheel. See Air Discharge of Braking System
Caution After the installation, press the brake pedal several times to ensure that the brake system works normally. Perform road test for inspection.
Right Front Brake Caliper Body Sub-Assembly - Removal and Installation
Removal
- Set the intelligent power brake system assembly to "installation mode". See Installation Mode of Intelligent Power Braking System
- Remove the right front wheel assembly. See Wheel Assembly - Removal and Installation
- Discharge brake fluid. See Replacement of Brake Fluid
- Remove one fixing bolt and detach the right front brake hose assembly.
- Remove 2 fixing bolts, and take out the right front brake caliper sub-assembly.
Caution The brake fluid has a strong corrosive effect on the paint. If it is accidentally splashed on the paint of the vehicle body, it must be cleaned with a rag as soon as possible. Avoid oil contact with skin. If it is accidentally splashed into the eyes, immediately rinse with plenty of water and seek medical attention as soon as possible. Do not discharge the oil at will, and recycle it according to local regulations.
Installation
- The installation steps are opposite to the removal steps.
- Fill the brake fluid and drain the brake system of the right front wheel. See Air Discharge of Braking System
Caution After the installation, press the brake pedal several times to ensure that the brake system works normally. Perform road test for inspection.
