Orisinil
BYD Atto 3
Buku Jari Kemudi Belakang Kanan - Paket Purna Jual
Kode OE / Material
14735239-00SC2EM-2404201HW$83USD
TersediaSelanjutnya:
- Tinjau pilihan Anda di halaman keranjang.
- Bayar langsung lewat Stripe (jika semua item ber-harga retail).
- Atau kirim daftar sebagai penawaran untuk diskon grosir.
Spesifikasi Teknis
- Model Kendaraan
- BYD Atto 3
- Konfigurasi Kemudi
- Setir Kiri & Kanan
- Kategori
- Poros Penggerak & Gandar
Pengiriman & Pengembalian
Dikirim ke seluruh dunia dari Tiongkok melalui pengiriman udara atau laut. Pengiriman standar 5–30 hari kerja, ekspres 2–10 hari kerja. Biaya pengiriman dihitung saat checkout.
Jendela pengembalian 7 hari untuk barang yang belum digunakan dalam kemasan asli. Hubungi kami sebelum mengembalikan barang apa pun.
Kendaraan yang Kompatibel — Buku Jari Kemudi Belakang Kanan - Paket Purna Jual
BYDYuan PLUS/Atto 3
2024Buku Jari Kemudi Belakang Kanan - Paket Purna Jual Panduan Bengkel — BYD Atto 3
Rear Right Steering Knuckle Assembly - Removal and Installation
Removal
- Remove the rear right brake mudguard. Refer to Right Rear Brake Mudguard - Removal and Installation
- Remove the rear suspension right trailing arm assembly. Refer to Rear Suspension Right Towing Arm Assembly - Removal and Installation
- Remove 1 fixing bolt, and put aside the floor wiring harness.
- Remove 1 fixing nut/bolt from the rear right steering knuckle and the rear right shock absorber assembly.
- Remove 1 fixing nut/bolt from the rear right steering knuckle and the upper right arm assembly of the rear suspension.
- Remove 1 fixing nut/bolt between the rear right suspension lower arm assembly and the rear right steering knuckle.
- Remove the rear right steering knuckle.
- Remove 1 fixing nut.
- Detach the rear right suspension control arm assembly, and take out the rear right knuckle.
Installation
- Install it in the reverse order of removal.
- Implement four-wheel alignment after installing the rear steering knuckle. Refer to Four-Wheel Alignment
Left Rear Steering Knuckle - Removal and Installation
Removal
- Remove the left rear brake mudguard. See Left Rear Brake Mudguard - Removal and Installation
- Remove the rear suspension left towing arm assembly. See Rear Suspension Left Towing Arm Assembly - Removal and Installation
- Remove 1 fixing bolt, and put aside the floor wiring harness.
- Remove 1 fixing nut/bolt from the left rear steering knuckle and the left rear shock absorber assembly.
- Remove 1 fixing nut/bolt from the left rear steering knuckle and the upper left arm assembly of the rear suspension.
- Remove 1 fixing nut/bolt between the left rear suspension lower arm assembly and the left rear steering knuckle.
- Remove the left rear steering knuckle.
- Remove 1 fixing nuts.
- Detach the left rear suspension control arm assembly, and take out the left rear knuckle.
Installation
- The installation steps are opposite to the removal steps.
- Implement four-wheel alignment after installing the rear steering knuckle. See Four-Wheel Alignment
