OrisinilPremium
BYD Atto 3
Buku jari kemudi kanan depan
Kode OE / Material
13781670-00SC2E-2304112A$52USD
TersediaSelanjutnya:
- Tinjau pilihan Anda di halaman keranjang.
- Bayar langsung lewat Stripe (jika semua item ber-harga retail).
- Atau kirim daftar sebagai penawaran untuk diskon grosir.
Spesifikasi Teknis
- Model Kendaraan
- BYD Atto 3
- Konfigurasi Kemudi
- Setir Kiri & Kanan
- Kategori
- Poros Penggerak & Gandar
Pengiriman & Pengembalian
Dikirim ke seluruh dunia dari Tiongkok melalui pengiriman udara atau laut. Pengiriman standar 5–30 hari kerja, ekspres 2–10 hari kerja. Biaya pengiriman dihitung saat checkout.
Jendela pengembalian 7 hari untuk barang yang belum digunakan dalam kemasan asli. Hubungi kami sebelum mengembalikan barang apa pun.
Kendaraan yang Kompatibel — Buku jari kemudi kanan depan
BYDYuan PLUS/Atto 3
2024Buku jari kemudi kanan depan Panduan Bengkel — BYD Atto 3
Right Front Steering Knuckle - Removal and Installation
Removal
- Remove the right front hub unit assembly. See Front Hub Unit Assembly - Removal and Installation
- Remove the right front ball stud press assembly. See Ball Stud Press Assembly - Removal and Installation
- Remove the right front wheel speed sensor. See Right Front Wheel Speed Sensor - Removal and Installation
- Detach the mechanical steering gear with tie rod assembly from the right front steering knuckle.
- Remove 1 fixing pin.
- Remove 1 fixing nut.
- Remove the ball joint with the ball joint remover.
- Remove the right front steering knuckle.
- Detach the wiring harness clip and put aside the wiring harness.
- Remove 2 fixing nuts/bolts, and take out the right front steering knuckle.
Installation
- The installation steps are opposite to the removal steps.
- Wheel alignment shall be carried out after the installation. See Four-Wheel Alignment
Left Front Steering Knuckle - Removal and Installation
Removal
- Remove the left front hub unit assembly. See Front Hub Unit Assembly - Removal and Installation
- Remove the left front ball stud press assembly. See Ball Stud Press Assembly - Removal and Installation
- Remove the left front wheel speed sensor. See Left Front Wheel Speed Sensor - Removal and Installation
- Detach the mechanical steering gear with tie rod assembly from the left front steering knuckle.
- Remove 1 fixing pin.
- Remove 1 fixing nuts.
- Remove the ball joint with the ball joint remover.
- Remove the left front steering knuckle.
- Detach the wiring harness clip, and put aside the wiring harness
- Remove 2 fixing nuts, take out 2 fixing bolts, and take out the left front steering knuckle.
Installation
- The installation steps are opposite to the removal steps.
- Wheel alignment shall be carried out after the installation. See Four-Wheel Alignment
