Rakitan gesper sabuk pengaman belakang kiri
Kode OE / Material
13465326-00SC2EM-5812070Selanjutnya:
- Tinjau pilihan Anda di halaman keranjang.
- Bayar langsung lewat Stripe (jika semua item ber-harga retail).
- Atau kirim daftar sebagai penawaran untuk diskon grosir.
Spesifikasi Teknis
- Model Kendaraan
- BYD Atto 3
- Konfigurasi Kemudi
- Setir Kiri & Kanan
- Kategori
- Kursi & Sabuk Pengaman
Pengiriman & Pengembalian
Dikirim ke seluruh dunia dari Tiongkok melalui pengiriman udara atau laut. Pengiriman standar 5–30 hari kerja, ekspres 2–10 hari kerja. Biaya pengiriman dihitung saat checkout.
Jendela pengembalian 7 hari untuk barang yang belum digunakan dalam kemasan asli. Hubungi kami sebelum mengembalikan barang apa pun.
Kendaraan yang Kompatibel — Rakitan gesper sabuk pengaman belakang kiri
Rakitan gesper sabuk pengaman belakang kiri Panduan Bengkel — BYD Atto 3
Left Rear Seat Belt Buckle Assembly - Removal and Installation
Removal
- Remove the left rear seat cushion assembly. See Left Rear Seat Cushion Assembly - Removal and Installation
- Disconnect 1 connector of the left rear seat belt buckle assembly.
- Detach 1 wiring harness clip of the left rear seat belt buckle assembly.
- Remove 1 fixing bolt from it, and take out the left rear seat belt buckle assembly.
Installation
- The installation steps are opposite to the removal steps.
Left Rear Seat Belt Assembly - Removal and Installation
Removal
- Remove the left C-pillar upper guard assembly. See Left C-Pillar Upper Guard Assembly - Removal and Installation
- Remove 1 fixing bolt from the left rear seat belt assembly.
- Disconnect 1 connector of the left rear seat belt assembly.
- Remove the left rear seat belt assembly.
- Remove 1 fixing bolt.
- Remove 1 fixing bolt, and take out the left rear seat belt assembly.
Caution When disconnecting the connector, insert the small screwdriver wrapped with tape into the connector slot to pry up the striker, and then pull out the connector.
Installation
- The installation steps are opposite to the removal steps.
Caution After installation, check whether the seat belt is installed in place to ensure that there is no distortion or seizure.
Right Rear Seat Belt Buckle Assembly - Removal and Installation
Removal
- Remove the left rear seat cushion assembly. See Left Rear Seat Cushion Assembly - Removal and Installation
- Disconnect 1 connector of the right rear seat belt buckle assembly.
- Detach the wiring harness clip from the right rear seat belt buckle assembly.
- Remove 1 fixing bolt from it, and take out the right rear seat belt buckle assembly.
Installation
- The installation steps are opposite to the removal steps.
Rakitan gesper sabuk pengaman belakang kiri Diagram Pemasangan — BYD Atto 3
