مجموعة لوحة التوصيل اليمنى للعارضة العرضية العلوية لخزان الماء

Removal

1. Clear 19 welding spots, and take out the right side wall front connecting plate assembly.
   

Installation

1. Secure the right side wall front connecting plate assembly to the mounting position.
2. Check and adjust the relative position and dimensions of the right side wall front connecting plate assembly and the surrounding parts. See Front Door
3. Weld 19 welding spots on the right side wall front connecting plate assembly.
   
4. Apply body sealant and internal coating at corresponding positions.
5. After the external coating is applied, the anti rust agent shall be applied on the inner panel of the welding spots of the closed section structure.

Removal

1. Remove the front compartment right trim panel assembly. See Front Compartment Right Trim Panel Assembly - Removal and Installation
2. Remove 5 fixing bolts, and take out the water tank upper beam right connecting plate assembly.
   

Installation

1. The installation steps are opposite to the removal steps.

Removal

1. Remove the front compartment left trim panel assembly. See Front Compartment Left Trim Panel Assembly - Removal and Installation
2. Remove 4 fixing bolts, and take out the left connecting plate of upper beam of water tank.
   

Installation

1. The installation steps are opposite to the removal steps.