مجموعة صمام الماء الكهربائي ثلاثي الاتجاه

Removal

1. Discharge coolant. See Replacement of Coolant
2. Remove the front motor lower mudguard assembly. See Front Motor Lower Mudguard Assembly - Removal and Installation
3. Detach the pipeline connection of the three-way water valve body assembly.
   
4. Disconnect 1 connector.
5. Loosen 3 fixing clamps, and detach the cooling pipe assembly 3, the motor cooling water pump inlet pipe assembly and the plate heat exchanger outlet pipe assembly from the three-way water valve body assembly.
6. Remove 2 fixing bolts, and take out the three-way water valve body assembly.
   

Installation

1. The installation steps are opposite to the removal steps.

Removal

1. Discharge coolant. See Replacement of Coolant
2. Remove the front motor lower mudguard assembly. See Front Motor Lower Mudguard Assembly - Removal and Installation
3. Detach the pipeline connection of electric water pump assembly I.
   
4. Disconnect 1 connector.
5. Loosen 2 fixing clamps, and detach the connection between the plate heat exchanger inlet pipe assembly, the cooling pipe assembly 2 and the electric water pump assembly I.
6. Remove 2 fixing bolts, and take out the electric water pump assembly I.
   

Installation

1. The installation steps are opposite to the removal steps.