ОригиналАналогНеоригинал
BYD Atto 3
Верхний кронштейн крепления переднего бампера
OE / Каталожные коды
13496355-00SC2E-2803115M$36USD
В наличииЧто дальше:
- Просмотрите выбранное на странице корзины.
- Оплата напрямую через Stripe (когда все позиции с розничной ценой).
- Или отправьте список как запрос для оптовой цены.
Технические характеристики
- Модель
- BYD Atto 3
- Конфигурация рулевого
- LHD и RHD
- Категория
- Бамперы
Доставка и возврат
Доставка по всему миру из Китая авиа или морем. Стандартная доставка 5–30 рабочих дней, экспресс 2–10 рабочих дней. Стоимость рассчитывается на оформлении заказа.
7-дневный возврат для неиспользованных товаров в оригинальной упаковке. Свяжитесь с нами до отправки возврата.
Совместимые автомобили — Верхний кронштейн крепления переднего бампера
BYDYuan PLUS/Atto 3
2024Верхний кронштейн крепления переднего бампера Руководство по ремонту — BYD Atto 3
Replacement of Front Bumper Beam Right Mounting Plate Assembly
Removal
- Remove the front end module locating mounting plate. See Front Module Locating Mounting Plate
- Clear 2 welding spots from the front bumper beam right mounting plate assembly.
- Clear 5 welding spots, and take out the front bumper beam right mounting plate assembly.
Installation
- Secure the front bumper beam right mounting plate assembly to the mounting position.
- Check and adjust the relative position and dimensions of the front bumper beam right mounting plate assembly and surrounding parts.
- Weld 2 welding spots on the front bumper beam right mounting plate assembly.
- Weld 5 welding spots on the front bumper beam right mounting plate assembly.
Replacement of Front Bumper Beam Left Mounting Plate Assembly
Removal
- Remove the front end module locating mounting plate. See Front Module Locating Mounting Plate
- Clear 2 welding spots from the front bumper beam left mounting plate assembly.
- Clear 5 welding spots, and take out the front bumper beam left mounting plate assembly.
Installation
- Secure the front bumper beam left mounting plate assembly to the mounting position.
- Check and adjust the relative position and dimensions of the front bumper beam left mounting plate assembly and surrounding parts.
- Weld 2 welding spots on the front bumper beam left mounting plate assembly.
- Weld 5 welding spots on the front bumper beam left mounting plate assembly.
Upper Mounting Bracket of Front Bumper - Removal and Installation
Removal
- Remove the logo trim from the upper part of front bumper. See Logo Trim on the Upper Part of Front Bumper - Removal and Installation
- Detach the front bumper wiring harness.
- Disconnect 1 connector.
- Detach 1 wiring harness clips.
- Remove the fasteners from the upper mounting bracket of front bumper.
- Remove 5 fixing nuts.
- Remove 10 fixing screws.
- Take out the front bumper upper mounting bracket.
Installation
- The installation steps are opposite to the removal steps.
Front Bumper Left Bracket - Removal and Installation
Removal
- Remove the front bumper assembly. See Front Bumper Assembly - Removal and Installation
- Remove 3 fixing bolts, and take out the front bumper left bracket.
Installation
- The installation steps are opposite to the removal steps.
Front Bumper Right Bracket - Removal and Installation
Removal
- Remove the front bumper assembly. See Front Bumper Assembly - Removal and Installation
- Remove 3 fixing bolts, and take out the front bumper right bracket.
Installation
- The installation steps are opposite to the removal steps.
Верхний кронштейн крепления переднего бампера Схема установки — BYD Atto 3
