Верхняя защитная пластина левой стойки B в сборе
OE / Каталожные коды
13182864-00SC2E-5402210AЧто дальше:
- Просмотрите выбранное на странице корзины.
- Оплата напрямую через Stripe (когда все позиции с розничной ценой).
- Или отправьте список как запрос для оптовой цены.
Технические характеристики
- Модель
- BYD Atto 3
- Конфигурация рулевого
- Универсальный (LHD и RHD)
- Категория
- Внутренняя отделка
Доставка и возврат
Доставка по всему миру из Китая авиа или морем. Стандартная доставка 5–30 рабочих дней, экспресс 2–10 рабочих дней. Стоимость рассчитывается на оформлении заказа.
7-дневный возврат для неиспользованных товаров в оригинальной упаковке. Свяжитесь с нами до отправки возврата.
Совместимые автомобили — Верхняя защитная пластина левой стойки B в сборе
Верхняя защитная пластина левой стойки B в сборе Руководство по ремонту — BYD Atto 3
Left A-Pillar Upper Guard Assembly - Removal and Installation
Removal
- Detach part of the left front door frame weather strip.
- Pry up the left A-pillar upper guard assembly.
Caution Be careful when removing the trim panel to avoid scratching the surface material.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.
Left B-Pillar Upper Guard Assembly - Removal and Installation
Removal
- Remove the left B-pillar lower guard assembly. See Left B-Pillar Lower Guard Assembly - Removal and Installation
- Pry up the side air curtain identification cover.
- Remove 1 fixing nut from the left B-pillar upper fender assembly.
- Insert the front removal hole with an appropriate tool.
- Insert the rear removal hole with an appropriate tool,and detach the connection between seat belt and buckle.
- Remove 2 fixing screws from the left B-pillar upper fender assembly.
- Take out the left B-pillar upper fender assembly.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.
Left C-Pillar Upper Guard Assembly - Removal and Installation
Removal
- Remove the left rear side wall guard assembly. See Left Rear Side Wall Guard Assembly - Removal and Installation
- Pry up the side air curtain identification cover.
- Remove 1 fixing nut from the left C-pillar upper guard assembly.
- Pry up the left C-pillar upper guard assembly.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.
