Rakitan panel trim lengkungan roda belakang kanan
Kode OE / Material
13186508-00SC2E-5302440Selanjutnya:
- Tinjau pilihan Anda di halaman keranjang.
- Bayar langsung lewat Stripe (jika semua item ber-harga retail).
- Atau kirim daftar sebagai penawaran untuk diskon grosir.
Spesifikasi Teknis
- Model Kendaraan
- BYD Atto 3
- Konfigurasi Kemudi
- Universal (Setir Kiri & Kanan)
- Kategori
- Fender & Spakbor
Pengiriman & Pengembalian
Dikirim ke seluruh dunia dari Tiongkok melalui pengiriman udara atau laut. Pengiriman standar 5–30 hari kerja, ekspres 2–10 hari kerja. Biaya pengiriman dihitung saat checkout.
Jendela pengembalian 7 hari untuk barang yang belum digunakan dalam kemasan asli. Hubungi kami sebelum mengembalikan barang apa pun.
Kendaraan yang Kompatibel — Rakitan panel trim lengkungan roda belakang kanan
Rakitan panel trim lengkungan roda belakang kanan Panduan Bengkel — BYD Atto 3
Right Rear Wheel Eyebrow Trim Panel Assembly - Removal and Installation
Removal
- Remove 1 fixing screw from the right rear wheel eyebrow trim panel assembly.
- Use a plastic crow bar to carefully pry up the right rear wheel eyebrow trim panel assembly.
Caution Be careful when removing the trim panel to avoid scratching the surface material.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.
Right Rear B-Pillar Exterior Trim Panel Assembly - Removal and Installation
Removal
- Remove the right rear door glass assembly. See Right Rear Door Glass Assembly - Removal and Installation
- Detach part of the right rear door mud tank assembly.
- Remove 3 fixing screws, and take out the right rear B-pillar exterior trim panel assembly.
Installation
- The installation steps are opposite to the removal steps.
Left Rear Wheel Eyebrow Trim Panel Assembly - Removal and Installation
Removal
- Remove 1 fixing screw from the left rear wheel eyebrow trim panel assembly.
- Use a plastic crow bar to carefully pry up the left rear wheel eyebrow trim panel assembly.
Caution Be careful when removing the trim panel to avoid scratching the surface material.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.
