Rakitan trim lengkungan roda depan kanan
Kode OE / Material
13186506-00SC2E-5302420Spesifikasi Teknis
- Model Kendaraan
- BYD Atto 3
- Konfigurasi Kemudi
- Universal (Setir Kiri & Kanan)
- Kategori
- Fender & Spakbor
Pengiriman & Pengembalian
Dikirim ke seluruh dunia dari Shanghai, Tiongkok melalui pengiriman udara atau laut. Pengiriman standar 5–30 hari kerja, ekspres 2–10 hari kerja. Biaya pengiriman dihitung saat checkout.
Jendela pengembalian 7 hari untuk barang yang belum digunakan dalam kemasan asli. Hubungi kami sebelum mengembalikan barang apa pun.
Kendaraan yang Kompatibel — Rakitan trim lengkungan roda depan kanan
Rakitan trim lengkungan roda depan kanan Panduan Bengkel — BYD Atto 3
Right Front Wheel Eyebrow Trim Panel Assembly - Removal and Installation
Removal
- Remove 2 fixing screws from the right front wheel eyebrow trim panel assembly.
- Use a plastic crow bar to carefully pry up the right front wheel eyebrow trim panel assembly.
Caution Be careful when removing the trim panel to avoid scratching the surface material.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.
Left Front Wheel Eyebrow Trim Panel Assembly - Removal and Installation
Removal
- Remove 2 fixing screws from the left front wheel eyebrow trim panel assembly.
- Use a plastic crow bar to carefully pry up the left front wheel eyebrow trim panel assembly.
Caution Be careful when removing the trim panel to avoid scratching the surface material.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.
