Orisinil
BYD Atto 3
Rakitan kunci pintu depan kanan
Kode OE / Material
13466921-00SC2EM-6105209A$19USD
TersediaSelanjutnya:
- Tinjau pilihan Anda di halaman keranjang.
- Bayar langsung lewat Stripe (jika semua item ber-harga retail).
- Atau kirim daftar sebagai penawaran untuk diskon grosir.
Spesifikasi Teknis
- Model Kendaraan
- BYD Atto 3
- Konfigurasi Kemudi
- Setir Kiri & Kanan
- Kategori
- Komponen Bodi Eksterior
Pengiriman & Pengembalian
Dikirim ke seluruh dunia dari Tiongkok melalui pengiriman udara atau laut. Pengiriman standar 5–30 hari kerja, ekspres 2–10 hari kerja. Biaya pengiriman dihitung saat checkout.
Jendela pengembalian 7 hari untuk barang yang belum digunakan dalam kemasan asli. Hubungi kami sebelum mengembalikan barang apa pun.
Rakitan kunci pintu depan kanan Panduan Bengkel — BYD Atto 3
Right Front Door Lock Body Assembly - Removal and Installation
Removal
- Remove the right front door sealing plug I. See Right Front Door Sealing Plug I - Removal and Installation
- Remove the right front door movable guide rail and mud tank assembly. See Right Front Door Movable Guide Rail and Mud Tank Assembly - Removal and Installation
- Detach 2 fixing clips, and detach the right front door lock cylinder lever, the right front door lock outward-opening lever
and the right front door lock body assembly.
- Disconnect one connector of right front door lock assembly.
- Remove the right front door lock body assembly.
- Detach the fixing rubber plug from the right front door assembly.
- Remove 3 fixing bolts, and take out the right front door lock body assembly.
Installation
- Follow the removal steps in reverse order to install.
Caution After the installation, check the functionality of the front door lock body assembly.
Left Front Door Lock Body Assembly - Removal and Installation
Removal
- Remove the left front door sealing plug I. See Left Front Door Sealing Plug I - Removal and Installation
- Remove the left front door movable guide rail and mud tank assembly. See Left Front Door Movable Guide Rail and Mud Tank Assembly - Removal and Installation
- Detach one fixing clip, and detach the left front door lock outward-opening lever from the left front door lock body assembly.
- Disconnect one connector of left front door lock assembly.
- Remove the left front door lock body assembly.
- Detach the fixing rubber plug from the left front door assembly.
- Remove 3 fixing bolts, and take out the left front door lock body assembly.
Installation
- Follow the removal steps in reverse order to install.
Caution After the installation, check the functionality of the front door lock body assembly.
Side Door Lock Ring Assembly - Removal and Installation
Removal
- Remove 2 fixing bolts, and take out the side door lock ring assembly.
Installation
- The installation steps are opposite to the removal steps.
