مجموعة لوحة التطعيم اليسرى للسبويلر

Removal

1. Power off the low voltage electrical system. See Power-off and Power-on of Low Voltage Electrical System
2. Remove the tailgate upper guard assembly. See Tailgate Upper Guard Assembly - Removal and Installation
3. Disconnect the wiring harness of spoiler assembly.
   
4. Disconnect 1 connector.
5. Detach the rear wash line sub-assembly IV from the rear wash line sub-assembly III.
6. Detach 2 silicon seals.
7. Remove 4 rubber covers from the tailgate.
   
8. Remove the fasteners from the spoiler assembly and its accessories.
   
9. Remove 6 fixing screws.
10. Remove 6 fixing bolt.
11. Pry up the spoiler assembly and its accessories.
    
12. Remove 4 fixing screws, and take out the left spoiler trim panel assembly.
    

Installation

1. The installation steps are opposite to the removal steps.

Removal

1. Pry up the instrument panel left trim panel assembly.
   

Installation

1. The installation steps are opposite to the removal steps.

Removal

1. Remove the instrument panel left end guard assembly. See Left Shield Assembly of Instrument Panel - Removal and Installation
2. Remove the lower fixing plate of PAD mounting base guard. See Lower Fixing Plate of PAD Mounting Base Guard - Removal and Installation
3. Remove the console body assembly. See Console Body Assembly - Removal and Installation
4. Remove one fixing screw.
   
5. Detach 17 fixing clips, and take out the instrument panel left trim panel assembly.
   

Installation

1. Follow the removal steps in reverse order to install.