مجموعة تطعيم السبويلر الأيمن

Removal

1. Power off the low voltage electrical system. See Power-off and Power-on of Low Voltage Electrical System
2. Remove the tailgate upper guard assembly. See Tailgate Upper Guard Assembly - Removal and Installation
3. Disconnect the wiring harness of spoiler assembly.
   
4. Disconnect 1 connector.
5. Detach the rear wash line sub-assembly IV from the rear wash line sub-assembly III.
6. Detach 2 silicon seals.
7. Remove 4 rubber covers from the tailgate.
   
8. Remove the fasteners from the spoiler assembly and its accessories.
   
9. Remove 6 fixing screws.
10. Remove 6 fixing bolt.
11. Pry up the spoiler assembly and its accessories.
    
12. Remove 4 fixing screws, and take out the spoiler right trim panel assembly.
    

Installation

1. The installation steps are opposite to the removal steps.

Removal

1. Power off the low voltage electrical system. See Power-off and Power-on of Low Voltage Electrical System
2. Remove the tailgate upper guard assembly. See Tailgate Upper Guard Assembly - Removal and Installation
3. Disconnect the wiring harness of spoiler assembly.
   
4. Disconnect 1 connector.
5. Detach the rear wash line sub-assembly IV from the rear wash line sub-assembly III.
6. Detach 2 silicon seals.
7. Remove 4 rubber covers from the tailgate.
   
8. Remove the fasteners from the spoiler assembly and its accessories.
   
9. Remove 6 fixing screws.
10. Remove 6 fixing bolt.
11. Pry up the spoiler assembly and its accessories.
    
12. Remove 4 fixing screws, and take out the left spoiler trim panel assembly.
    

Installation

1. The installation steps are opposite to the removal steps.