جسم لوحة تنّورة الباب الخلفي الأيمن

Removal

1. Remove the right side wall assembly. See
2. Clear 37 welding spots, take out the reinforcement plate of right door sill inner panel.
   
3. Clear 7 welding spots, and take out the right door sill inner panel assembly.
   

Installation

1. Secure the right door sill inner panel assembly to the mounting position.
2. Check and adjust the relative position and dimensions of the right door sill inner panel assembly and the surrounding parts.
3. Weld 7 welding spots on the right door sill inner panel assembly.
   
4. Fix the reinforcement plate of right door sill inner panel to the mounting position.
5. Check and adjust the relative position and dimensions of the reinforcement plate of right door sill inner panel and the surrounding parts.
6. Weld 37 welding spots on the reinforcement plate of right door sill inner panel.
   
7. Apply body sealant and internal coating at corresponding positions.
8. After the external coating is applied, the anti rust agent shall be applied on the inner panel of the welding spots of the closed section structure.

Removal

1. Pry up the connection between the right rear door skirt panel assembly and the inside of the right rear door.
   
2. Remove 2 fixing screws.
3. Pry up the connection between the right rear door skirt panel assembly and the inside of the right rear door.
4. Pry up the connection between the right rear door skirt panel assembly and the outside of the right rear door, and take it out.
   

Install

1. The installation is performed in reverse order of removal.

Removal

1. Pry up the connection between the left rear door skirt panel assembly and the inside of the left rear door.
   
2. Remove 2 fixing screws.
3. Pry up the connection between the left rear door skirt panel assembly and the inside of the left rear door.
4. Pry up the connection between the left rear door skirt panel assembly and the outside of the left rear door, and take it out.
   

Installation

1. The installation steps are opposite to the removal steps.

Removal

1. Remove the right rear door rear movable guide rail and mud tank assembly. See Right Rear Door Rear Movable Guide Rail and Mud Tank Assembly - Removal and Installation
2. Detach one fixing clip, and detach the right rear door lock outward-opening lever from the right rear door lock body assembly.
   
3. Remove 3 fixing bolts of the right rear door lock body assembly.
   
4. Disconnect one connector, and take out the right rear door lock body assembly.
   

Installation

1. Follow the removal steps in reverse order to install.