مجموعة المقبض الخارجي للباب الخلفي الأيمن

Removal

1. Lift the right rear door glass to the limit position.
2. Remove the right rear door sealing plug I. See Right Rear Door Sealing Plug I - Removal and Installation
3. Take out 1 screw cover, and loosen 1 fixing screw of the right rear door outer handle assembly.
   
4. Pull the outer handle, and take out the plug.
   
5. Detach the outer handle gasket.
   
6. Unlock the right rear door outer handle assembly.
   
7. Press the locking mechanism by hand.
8. And turn the unlocking mechanism over at the same time.
9. Take out the right rear door outer handle assembly.
   
10. Remove 1 fixing screw of the right rear door outer handle seat assembly.
    
11. Remove the right rear door outer handle seat assembly.
    
12. Detach 1 fixing clip, and detach the right rear door lock outward-opening lever from the right rear door outer handle seat assembly.
13. Take out the right rear door outer handle seat assembly.

Installation

1. The installation steps are opposite to the removal steps.

Removal

1. Pry up the right rear door handle box cover.
   

Installation

1. The installation steps are opposite to the removal steps.

Removal

1. Remove the right rear door guard board assembly. Right Rear Door Guard Assembly - Removal and Installation
2. Remove the right rear door snap handle ambient light control module.
   
3. Disconnect 1 connectors.
4. Remove 2 fixing screws, and take out the right rear door snap handle ambient light control module.
5. Remove the right rear door inner snap handle assembly.
   
6. Detach 1 fixing clip.
7. Remove 3 fixing screws, and take out the right rear door inner snap handle assembly.
8. Remove 2 fixing screws, and put aside the right rear tweeter horn.
   
9. Remove 1 fixing screws.
   
10. Pry up the right rear door inner snap handle seat and the handle.
    
11. Remove 2 fixing screws, and take out the right door inner snap handle inner plate.
    
12. Take out the right rear door inner snap handle ambient light and the tweeter horn.
    

Install

1. The installation is performed in reverse order of removal.