مجموعة تطعيم قوس العجلة الأمامية اليمنى
أكواد OE / المواد
13186506-00SC2E-5302420ماذا يحدث بعد ذلك:
- راجع اختياراتك في صفحة السلة.
- ادفع مباشرة عبر Stripe (عندما تكون كل العناصر بأسعار التجزئة).
- أو أرسل القائمة كطلب عرض سعر للجملة.
المواصفات الفنية
- موديل السيارة
- BYD Atto 3
- تكوين التوجيه
- عام (مقود يسار ومقود يمين)
- الفئة
- رفارف وحواجز طين
الشحن والإرجاع
شحن عالمي من الصين جواً أو بحراً. التسليم القياسي 5–30 يوم عمل، السريع 2–10 أيام عمل. تحسب تكلفة الشحن عند الدفع.
نافذة إرجاع 7 أيام للقطع غير المستخدمة في عبوتها الأصلية. تواصل معنا قبل إرجاع أي قطعة.
السيارات المتوافقة — مجموعة تطعيم قوس العجلة الأمامية اليمنى
مجموعة تطعيم قوس العجلة الأمامية اليمنى دليل الورشة — BYD Atto 3
Right Front Wheel Eyebrow Trim Panel Assembly - Removal and Installation
Removal
- Remove 2 fixing screws from the right front wheel eyebrow trim panel assembly.

- Use a plastic crow bar to carefully pry up the right front wheel eyebrow trim panel assembly.

Caution Be careful when removing the trim panel to avoid scratching the surface material.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.
Left Front Wheel Eyebrow Trim Panel Assembly - Removal and Installation
Removal
- Remove 2 fixing screws from the left front wheel eyebrow trim panel assembly.

- Use a plastic crow bar to carefully pry up the left front wheel eyebrow trim panel assembly.

Caution Be careful when removing the trim panel to avoid scratching the surface material.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.



