وكالةتجاري
BYD Atto 3

مجموعة تطعيم قوس العجلة الأمامية اليسرى

أكواد OE / المواد

13186505-00SC2E-5302410
$39USD
متوفر
التوفّر بحسب الجودة

ماذا يحدث بعد ذلك:

  • راجع اختياراتك في صفحة السلة.
  • ادفع مباشرة عبر Stripe (عندما تكون كل العناصر بأسعار التجزئة).
  • أو أرسل القائمة كطلب عرض سعر للجملة.

المواصفات الفنية

موديل السيارة
BYD Atto 3
تكوين التوجيه
عام (مقود يسار ومقود يمين)

الشحن والإرجاع

شحن عالمي من الصين جواً أو بحراً. التسليم القياسي 5–30 يوم عمل، السريع 2–10 أيام عمل. تحسب تكلفة الشحن عند الدفع.

نافذة إرجاع 7 أيام للقطع غير المستخدمة في عبوتها الأصلية. تواصل معنا قبل إرجاع أي قطعة.

السيارات المتوافقةمجموعة تطعيم قوس العجلة الأمامية اليسرى

BYDYuan PLUS/Atto 3
2022–2025

مجموعة تطعيم قوس العجلة الأمامية اليسرى دليل الورشةBYD Atto 3

Left Front Wheel Eyebrow Trim Panel Assembly - Removal and Installation

Removal

  1. Remove 2 fixing screws from the left front wheel eyebrow trim panel assembly.
  2. Use a plastic crow bar to carefully pry up the left front wheel eyebrow trim panel assembly.

Caution Be careful when removing the trim panel to avoid scratching the surface material.

Installation

  1. The installation steps are opposite to the removal steps.

Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.

Right Front Wheel Eyebrow Trim Panel Assembly - Removal and Installation

Removal

  1. Remove 2 fixing screws from the right front wheel eyebrow trim panel assembly.
  2. Use a plastic crow bar to carefully pry up the right front wheel eyebrow trim panel assembly.

Caution Be careful when removing the trim panel to avoid scratching the surface material.

Installation

  1. The installation steps are opposite to the removal steps.

Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.