مجموعة لوحة الحماية العلوية للعمود B الأيسر
أكواد OE / المواد
13182864-00SC2E-5402210Aالمواصفات الفنية
- موديل السيارة
- BYD Atto 3
- تكوين التوجيه
- عام (مقود يسار ومقود يمين)
- الفئة
- تشطيب داخلي
الشحن والإرجاع
شحن عالمي من الصين جواً أو بحراً. التسليم القياسي 5–30 يوم عمل، السريع 2–10 أيام عمل. تحسب تكلفة الشحن عند الدفع.
نافذة إرجاع 7 أيام للقطع غير المستخدمة في عبوتها الأصلية. تواصل معنا قبل إرجاع أي قطعة.
السيارات المتوافقة — مجموعة لوحة الحماية العلوية للعمود B الأيسر
مجموعة لوحة الحماية العلوية للعمود B الأيسر دليل الورشة — BYD Atto 3
Left A-Pillar Upper Guard Assembly - Removal and Installation
Removal
- Detach part of the left front door frame weather strip.
- Pry up the left A-pillar upper guard assembly.
Caution Be careful when removing the trim panel to avoid scratching the surface material.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.
Left B-Pillar Upper Guard Assembly - Removal and Installation
Removal
- Remove the left B-pillar lower guard assembly. See Left B-Pillar Lower Guard Assembly - Removal and Installation
- Pry up the side air curtain identification cover.
- Remove 1 fixing nut from the left B-pillar upper fender assembly.
- Insert the front removal hole with an appropriate tool.
- Insert the rear removal hole with an appropriate tool,and detach the connection between seat belt and buckle.
- Remove 2 fixing screws from the left B-pillar upper fender assembly.
- Take out the left B-pillar upper fender assembly.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.
Left C-Pillar Upper Guard Assembly - Removal and Installation
Removal
- Remove the left rear side wall guard assembly. See Left Rear Side Wall Guard Assembly - Removal and Installation
- Pry up the side air curtain identification cover.
- Remove 1 fixing nut from the left C-pillar upper guard assembly.
- Pry up the left C-pillar upper guard assembly.
Installation
- The installation steps are opposite to the removal steps.
Caution Before installation, it is necessary to check whether all the clips are missing or damaged, and if so, install new clips, and then install the trim panel; After installation, check whether all clips are installed in place. The installation position of the trim panel may deviate, resulting in warping or abnormal gaps.
