ضوء الفرامل العلوي

Removal

1. Power off the low voltage electrical system. See Power-off and Power-on of Low Voltage Electrical System
2. Disconnect 1 connector of brake light switch.
   
3. Turn the brake light switch counterclockwise by 45 ° and take it out.
   

Installation

1. The installation steps are opposite to the removal steps.

Removal

1. Power off the low voltage electrical system. See Power-off and Power-on of Low Voltage Electrical System
2. Remove the tailgate upper guard assembly. See Tailgate Upper Guard Assembly - Removal and Installation
3. Disconnect the wiring harness of spoiler assembly.
   
4. Disconnect 1 connectors.
5. Detach the rear wash line sub-assembly IV from the rear wash line sub-assembly III.
6. Detach 2 silicon seals.
7. Remove 4 rubber covers from the tailgate.
   
8. Remove the fasteners from the spoiler assembly and its accessories.
   
9. Remove 6 fixing screw.
10. Remove 6 fixing bolts
11. Pry up the spoiler assembly and its accessories.
    
12. Remove the fasteners from the high-mount stop light.
    
13. Detach one wiring harness clips.
14. Remove 2 fixing nut.
15. Pry up the high-mount stop light.
    

Installation

1. Follow the removal steps in reverse order to install.