كتيفة تثبيت ACC

Removal

1. Remove the floor duct assembly. See Floor Duct Assembly - Removal and Installation
2. Detach 2 wiring harness clips from the console middle mounting bracket assembly.
   
3. Remove 2 fixing nuts, and take out the console middle mounting bracket assembly.
   

Installation

1. The installation steps are opposite to the removal steps.

Removal

1. Remove the console body assembly. See Console Body Assembly - Removal and Installation
2. Remove the interior detection antenna assembly (console rear mounting bracket). See Interior Detection Antenna Assembly (Rear Mounting Bracket of Console) - Removal and Installation
3. Detach the floor wiring harness clip from the console rear mounting bracket assembly.
   
4. Detach the instrument wiring harness clip from the console rear mounting bracket assembly.
   
5. Remove 2 clips connecting the console rear mounting bracket assembly and the carpet.
   
6. Remove the console rear mounting bracket assembly.
   
7. Remove 2 fixing nuts.
8. Remove 2 fixing screws, and take out the console rear mounting bracket assembly.

Installation

1. The installation steps are opposite to the removal steps.

Removal

1. Remove 2 fixing bolts, and detach the brake fluid reservoir assembly.
   
2. Remove the brake fluid reservoir mounting bracket assembly.
   
3. Remove 1 fixing clip, and detach the front compartment wiring harness.
4. Remove 4 fixing nuts, and take out the brake fluid reservoir mounting bracket assembly.

Installation

1. The installation steps are opposite to the removal steps.